Jual! Ultrasonic Flaw Detector CTS-602

Category:


Hubungi Kami Sekarang
Produk Berkualitas
Order via Telp / SMS 085795793793
Perlindungan Pembeli

Garansi Replacement bulan pertama
Garansi Full Service 1 tahun *(Syarat & Ketentuan Berlaku)

Description

Jual! Ultrasonic Flaw Detector CTS-602

cts602

Jual! Ultrasonic Flaw Detector CTS-602

Ultrasonic flaw detector sering digunakan untuk pendeteksi kecacatan pada hasil produksi , CTS-602 ini merupakan salah satu ultrasonic flaw detector dengan fitur yang cukup banyak yang akan menunjang hasil produksi anda lebih baik lagi .

flaw

Jual! Ultrasonic Flaw Detector CTS-602

FITUR :

  • Clear Image
  • Pencitraan linear
  • Pencitraan sektor
  • Akurat Flaw Posisi dan Ukuran
  • Ultrasonic Imaging dan A-scan Tampilan

FUNGSI :

  • Mudah dioperasikan dan user-friendly interface.
  • Mode array yang konvensional dan bertahap yang tersedia dalam sistem yang sama, yang merupakan nyaman untuk pengujian dan evaluasi inspektur ‘.
  • Sampai dengan 32 saluran, kompatibel dengan probe 16/32/64/128-element.
  • Transmisi gelombang persegi Bi-polar dan lebar pulsa transmisi disesuaikan.
  • Mengirimkan satu titik fokus dan menerima dinamis fokus.
  • Fitur dengan pemindaian linier, fixed-angle linear scanning dan scanning sektor.
  • Sebuah monitor VGA atau proyektor dapat dihubungkan melalui port VGA, baik untuk promosi, demonstrasi dan pengajaran multi-media untuk kursus pelatihan deteksi cacat.
  • File yang disimpan dalam sistem dapat diekspor ke komputer untuk membuat laporan
  • melalui port USB.

 

 

Technical Specifications:
FunctionConventionalPhased Array
System Bandwidth (-6dB)0.5~15MHz1-10MHz
A/D Sampling FrequencyMax 240MHz120MHz
Probe Connector2, BNC or Lemo Connectors1, for supporting 16/32/64/128 elements probes, featured with auto recognition
Active Aperture——2-32, the upper limit depend on the probe element number
Pulse GeneratorType: Negative Spike Pulse; Voltage: approx 370V; Frequency: 20-500Hz; Power: Low/HighType: Bipolar Square Wave Pulse; Transmit Voltage: 20~150V, Step:10V; Pulse Width: 40~500ns, Step: 20ns; Frequency: 100-8KHz; Transmit Delay: 0-20µs; Resolution: 5ns
ReceiverGain: 0-110dB, Step: 0.5/1/2/6/12; Frequency Band (-6dB):1~4MHz/0.5~15MHz; Damping: Low/High; Rectify: Positive, Negative, Full, Filter, RFGain: 0-80dB; Frequency Band (-6dB):1~10MHz; Delay: 0~20µs; Resolution: 3.125ns.
Focus——Transmit: Single focus; Receive: 160MHz hardware real time dynamic focus; Max Range: 1008 focus points per scan line. 
FilterAuto adjustment based on operating frequency bandAuto adjustment based on probe frequency
Scan Type——Linear/Sector/C/D scan
Scan Line——Linear Scan: Max 256 lines; Sector: Max 128 Lines
Scan Angle Range——Linear: -45°~+45°; Sector: -80°~+80°
Scan Range0-6000mm (steel longitudinal wave), continuous and adjustable, Min Display Range: 10mm0~1000mm (steel longitudinal wave)
Material Velocity1000~10000m/s1000~10000m/s
Display Delay-100~1000mm (steel longitudinal wave)0~1000mm (steel longitudinal wave)
Probe Zero0~200µs——
Reject0~80 Linear Reject——
Curve FunctionDAC——
Auxiliary FunctionA-Scan echo freeze; auto calibration; angle measurement; peak value memory; parameter output; AWS D1.1/D1.5; USB disc storage——
Alarm SignalSound and Light alarm (build in buzzer and panel LED)
Test Point SelectionPeak Value, Front, J-FrontPeak Value
Unitmm/inchmm/inch
Measurement2 Gates: it can measure echo amplitude, sound path, horizontal distance, vertical distance and distance between 2 gates2 Gates: it can measure echo amplitude, sound path, horizontal distance, vertical distance and distance between 2 gates; 2 measurements cursors: it can measure horizontal and vertical position and distance between cursors on the image
Horizontal Linearity«0.5%——
Vertical Linearity«3%——
Attenuator Error12dB ± 1dB——
Dynamic Range»30dB——
Far field resolution»26dB——
Electric Noise Levelin initial state, when the detection range and gain are set to maximum, it is «20 (Frequency band 1-4MHz)  ——
EN NormEN-12668-1 compliant——