Flaw Detector CTS-602 Metode Phased Array Ultrasonic

Category:


Hubungi Kami Sekarang
Produk Berkualitas
Order via Telp / SMS 085795793793
Perlindungan Pembeli

Garansi Replacement bulan pertama
Garansi Full Service 1 tahun *(Syarat & Ketentuan Berlaku)

Description

Alat pendeteksi kecacatan benda dengan metode Phased Array Ultrasonic, Flaw detector ini mempunyai banyak kelebihan dengan fitur-fitur yang professional dan tentu saja spesifikasi yang tinggi . Ini merupakan Flaw detector dengan penjelasan gambar yang jernih , Gambar ultrasonik dan tampilan A-scan .

Flaw Detector CTS-602 Metode Phased Array Ultrasonic

Fitur :

  • Gambar jernih
  • Pencitraan Linear
  • Pencitraan Sektor
  • Posisi kerusakan dan ukuran akurat
  • Gambar Ultrasonik dan tampilan A-scan

Fungsi :

  • Mudah dioperasikan dan user friendly interface
  • Mode penyusunan yang konvensional dan bertahap yang tersedia dalam sistem yang sama, nyaman digunakan untuk pengujian dan evaluasi.
  • Memiliki sampai dengan 32 saluran, kompatibel dengan probe 16/32/64/128-element
  • Transmisi gelombang persegi bi-polar dan lebar pulsa transmisi disesuaikan.
  • Transmit fokus single point dan penerimaan fokus dinamis
  • Fitur dengan pemindaian linier, fixed angel linear scanning dan scanning sektor
    Sebuah monitor VGA atau proyektor dapat dihubungkan melalui port VGA, baik untuk promosi, demonstrasi dan pengajaran multimedia untuk kursus deteksi kerusakan.
  • File yang disimpan dalam sistem dapat diekspor ke komputer untuk membuat laporan malalui port USB.

Flaw Detector CTS-602 Metode Phased Array Ultrasonic

 

0°Linear Scan (Longitudinal wave)-45°~ 45°Sector Scan (Longitudinal wave)
Technical Specifications:
FunctionConventionalPhased Array
System Bandwidth (-6dB)0.5~15MHz1-10MHz
A/D Sampling FrequencyMax 240MHz120MHz
Probe Connector2, BNC or Lemo Connectors1, for supporting 16/32/64/128 elements probes, featured with auto recognition
Active Aperture——2-32, the upper limit depend on the probe element number
Pulse GeneratorType: Negative Spike Pulse; Voltage: approx 370V; Frequency: 20-500Hz; Power: Low/HighType: Bipolar Square Wave Pulse; Transmit Voltage: 20~150V, Step:10V; Pulse Width: 40~500ns, Step: 20ns; Frequency: 100-8KHz; Transmit Delay: 0-20µs; Resolution: 5ns
ReceiverGain: 0-110dB, Step: 0.5/1/2/6/12; Frequency Band (-6dB):1~4MHz/0.5~15MHz; Damping: Low/High; Rectify: Positive, Negative, Full, Filter, RFGain: 0-80dB; Frequency Band (-6dB):1~10MHz; Delay: 0~20µs; Resolution: 3.125ns.
Focus——Transmit: Single focus; Receive: 160MHz hardware real time dynamic focus; Max Range: 1008 focus points per scan line. 
FilterAuto adjustment based on operating frequency bandAuto adjustment based on probe frequency
Scan Type——Linear/Sector/C/D scan
Scan Line——Linear Scan: Max 256 lines; Sector: Max 128 Lines
Scan Angle Range——Linear: -45°~+45°; Sector: -80°~+80°
Scan Range0-6000mm (steel longitudinal wave), continuous and adjustable, Min Display Range: 10mm0~1000mm (steel longitudinal wave)
Material Velocity1000~10000m/s1000~10000m/s
Display Delay-100~1000mm (steel longitudinal wave)0~1000mm (steel longitudinal wave)
Probe Zero0~200µs——
Reject0~80 Linear Reject——
Curve FunctionDAC——
Auxiliary FunctionA-Scan echo freeze; auto calibration; angle measurement; peak value memory; parameter output; AWS D1.1/D1.5; USB disc storage——
Alarm SignalSound and Light alarm (build in buzzer and panel LED)
Test Point SelectionPeak Value, Front, J-FrontPeak Value
Unitmm/inchmm/inch
Measurement2 Gates: it can measure echo amplitude, sound path, horizontal distance, vertical distance and distance between 2 gates2 Gates: it can measure echo amplitude, sound path, horizontal distance, vertical distance and distance between 2 gates; 2 measurements cursors: it can measure horizontal and vertical position and distance between cursors on the image
Horizontal Linearity«0.5%——
Vertical Linearity«3%——
Attenuator Error12dB ± 1dB——
Dynamic Range»30dB——
Far field resolution»26dB——
Electric Noise Levelin initial state, when the detection range and gain are set to maximum, it is «20 (Frequency band 1-4MHz)  ——
EN NormEN-12668-1 compliant——